TheOneStopSatShop
1000mA, 1A, 5kV Microwave Oven High Voltage Fuse Assembly With Holder & Leads
- SKU:
- MWHVF1A0
- UPC:
- 5060239768572
- MPN:
- MWHVF1A
- Condition:
- New
- Availability:
- Available Now With Free UK Shipping
- Weight:
- 20.00 Grams
- Width:
- 0.65 (cm)
- Height:
- 4.00 (cm)
- Depth:
- 0.65 (cm)
- Shipping:
- Calculated at Checkout
Description
Microwave Oven High Voltage Fuse 1000mA 1A 5kV
High quality replacement type high voltage fuse for modern
microwave ovens. This high voltage fuse is wired in series with the high
voltage feed from the high voltage transformer to the magnetron.
The fuse will fail if there is a fault in the high voltage circuit.
Such a fault could be a short circuit magnetron or a short circuit high
voltage rectifier. In our experience however this fuse commonly fails
for no apparent reason. The fuse just gets stressed every time the
magnetron starts which eventually leads to the demise of the fuse.
If you have a microwave with this type of fuse then the symptom you
will get if it has failed is no cooking action. The microwave will
appear to start and countdown the time but there will be no heating
action.
The fuse is easy to check visibly by unscrewing the fuse housing
apart as shown in the photograph. You can then visually examine the wire
in the fuse to see if it has broken. For the more technically minded a
continuity check with an ohm meter will also check the fuse. A short
circuit reading should be obtained if the fuse is intact.
This is the technical specification of the fuse:
- Current Rating: 1000mA, 1A
- Voltage rating 5kV, 5000V
- Cable Length: 2 x 12cm HV Flying Leads Fitted
- Overall Length of Fuse Including The Cables: 330mm
- Fuse Housing Length: 95mm
- Fuse Housing Diameter: 14mm
- Connections: 2 x 6.3mm Insulated spade terminals
This type of fuse is fitted to many brands of microwaves and this
particular type of fuse is suitable for replacement in any brand. The
overall cable length of this fuse may be more than your original fuse
but it is quite permissible to tie back the cable to suit your oven.
Check the rating of the original fuse and replace with the correct
value. This listing is for the 1000mA version but other values are
available in our microwave parts section.
To fit this fuse it is necessary to remove the outer casing so
replacement should only be attempted by those who have experience in the
repair of electrical appliances. High voltages are present in a
microwave oven and it is important that the appliance is disconnected
from the mains before any servicing work is carried out.
Additional Information
Product Information: |
1000mA / 1A 5 kV High Voltage Fuse Assembly With Holder For Microwave Ovens |
Product Information: |
Complete Holder With HV Fuse Tube Inside, Internal Glass Fuse Tube Dimensions: 6.5mm x 40mm |
Product Information: |
2 x 12cm HV Flying Leads Terminated With 6.3mm / Quarter Inch Insulated Female Spade Connections |
Product Information: |
Can Cure A No Cooking Action Symptom With Your Microwave Oven |
Product Information: |
Compatible With Most Brands & Models of Microwave Ovens |