6 Pack Of KonstsmIde 230V, 1.5W, E10, Flicker Flame Welcome Candle BrIdge Bulb
- Available Now With Free UK Shipping
- 90.00 Grams
- 1.70 (cm)
- 6.60 (cm)
- 1.70 (cm)
- Calculated at Checkout
6 pack of genuine KonstsmIde 230V, 1.5W, E10 transparent flicker flame effect spare bulbs for mains operated set candle brIdges that use mains lamps. The colour is warm white.
The KonstsmIde part number is 1020-020
This E10 lamp is used in many KonstmIde welcome candle brIdges and can often be found in the flicker flame 7 and 16 light sets. The bulbs are mains operated so can be used in any light fitting that has an E10 lamp holder where mains operated lamps are needed.
Light fittings that use this type of lamp are generally parallel wired as the lamps are high voltage. This means that the light fitting doesn't need all lamps fitted in order for it to work.
Check the specification of your old lamps carefully before ordering as this lamp is not suitable for use in series light sets that use lamps with a rating from 23V - 55V
The lamps supplied will only light up and flicker when the full mains voltage is applied.
Let's Look at the lamp specifications:
- Lamp Type: Incandescent Tulip / Conical Lamp
- Colour: Warm White
- Lamp Voltage: 34V AC or DC
- Lamp Power: 1.5W
- Lamp Current: Typically 6.5mA / 0.007A
- Thread Size: E10 / 10mm
- Lamp Dimensions: 16mm x 75mm
- Pack Size: 6 Bulbs Supplied
- KonstsmIde Part Number: 1020-020
- Brand: KonstsmIde Retail Blister Packed