Panasonic
Panasonic RAF3330A Genuine Laser Assembly for DVD Recorders, DMR-ES10, DMR-ES20
- SKU:
- RFKV3330AKIT
- UPC:
- 5060239761856
- MPN:
- RFKV3330AKIT
- Condition:
- New
- Availability:
- Available Now With Free UK Shipping
- Weight:
- 63.00 Grams
- Width:
- 4.00 (cm)
- Height:
- 2.00 (cm)
- Depth:
- 5.30 (cm)
- Shipping:
- Calculated at Checkout
Description
Panasonic Laser Assembly for DVD Recorders RAF3330A-2
If you have DVD recorder with a defective laser then you can check if this part is suitable by checking the underside of the laser and looking for the number 3330A on the label as shown in the photograph. There are other lasers which look the same but have different part numbers on the label. Please check carefully before ordering.
Failure of this laser is now quite common. It commonly causes failure to read discs either intermittently or permanently. If you can hear the sled moving rapidly with little action of the spin motor during the read cycle then the laser is probably defective.
This part is a replacement kit for the RAF3330A and the RAF3330A-1 laser. The kit consists of the RAF3330A-2, a sheet and a replacement flexible connection cable. The kit part number is RFKV3330AKIT.
This part is fitted to many Panasonic DVD RAM drive units:
- All DVD recorders with the VXY1895 RAM drive fitted
- All DVD recorders with the VXY1897 RAM drive fitted
- All DVD recorders with the VXY1897-1 RAM drive fitted
- All DVD recorders with the VXY1897-1 RAM drive fitted
- All DVD recorders with the VXY1905-1 RAM drive fitted
If you have DVD recorder with a defective laser then you can check if this part is suitable by checking the underside of the laser and looking for the number 3330A on the label as shown in the photograph. There are other lasers which look the same but have different part numbers on the label. Please check carefully before ordering.
Failure of this laser is now quite common. It commonly causes failure to read discs either intermittently or permanently. If you can hear the sled moving rapidly with little action of the spin motor during the read cycle then the laser is probably defective.
Fitting of this laser is only to be completed by those competent in the repair of electronic equipment. It is necessary to remove the complete RAM drive unit by removing the flexible strip connector from the digital board and the power connector. Unscrew the complete RAM drive unit and remove the top cover.
Turn the white gear at the front of the loader to release the tray and pull the tray out. Remove the flexible strip from the laser and remove the right side running bar for the laser, there will be either metal clips or a screw holding it down and then remove the old laser. Turn the RAM drive upside down and remove the flexible connection strip from the RAM drive board and replace it with the new one.
Refit the new laser and reconnect the flexible strip. It is very important to be careful with the flexible strip connectors as they are easily broken. If you break any of them you will need a new RAM drive or digital board.
This laser unit is also fitted to the following models though as mentioned you must check the old laser type number as the type fitted is dependent on the type of RAM drive fitted to your model:
DMREX100, DMREX300, DMREH53, DMREH66, DMREH73V, DMREX200V, DMR-ES10EBLS, DMR-ES10EB-S, DMR-ES10EC-K, DMR-ES10EC-S, DMR-ES10EG-K, DMR-ES10EG-S, DMR-ES10EP-S, DMR-ES20DEBS, DMR-ES20EE-S, DMR-ES20EG-S, DMR-ES20EP-S
Additional Information
Product Information: |
Original Panasonic Laser Assembly Type RAF3330A |
Product Information: |
The RFK V3330AKIT is Supplied - RAF3330A-1 laser, Sheet & Flexible Strip |
Product Information: |
Fits Models: DMR-ES10EBLS, DMR-ES10EB-S, DMR-ES10EC-K, DMR-ES10EC-S, DMR-ES10EG-K |
Product Information: |
Also Fits: DMR-ES10EG-S, DMR-ES10EP-S, DMR-ES20DEBS, DMR-ES20EE-S, DMR-ES20EG-S, DMR-ES20EP-S |
Product Information: |
To Be Fitted Only By Skilled Repairers |